Product Description

PASS QUEST SPRILL 110BCD Narrow-Wide Road Chainring

The PASS QUEST SPRILL 110BCD Chainring is designed for compatible Shimano 4-arm road cranksets, including Dura-Ace FC-R9200, Ultegra FC-R8100 and 105 FC-R7100.

CNC-machined from high-strength 7075-T651 aluminum alloy, it combines a lightweight machined structure with high rigidity and a 3mm offset design for 1x road drivetrain applications.

Available from 40T to 58T, giving riders a wide range of gearing options for road, fast all-road and performance-oriented 1x builds.

Key Features

• 110BCD 4-Arm Design – Designed for compatible Shimano 4-arm road cranksets.
• 3mm Offset – Offset chainring design for compatible 1x drivetrain configurations.
• 7075-T651 Aluminum Alloy – High-strength aluminum construction for a balance of rigidity, durability and low weight.
• CNC-Machined Construction – Precision machining removes unnecessary material while maintaining structural support.
• Narrow-Wide Tooth Profile – Improves chain engagement and retention for 1x drivetrains.
• 8.5mm Extended Tooth Height – Deeper tooth engagement helps reduce the risk of chain drops.
• Chamfered Machining – Multiple CNC-machined chamfers reduce weight and create a more refined three-dimensional appearance.
• Anodized Finish – Durable surface treatment with a clean premium finish.
• 40T–58T Options – Wide gearing range for different road riding requirements.
• 9 / 10 / 11 / 12-Speed Chain Compatible – Supports standard compatible chains.

Compatibility

Designed for:

Shimano Dura-Ace FC-R9200
Shimano Ultegra FC-R8100
Shimano 105 FC-R7100

Important Compatibility Notice

Shimano 110BCD 4-arm cranksets have gone through several generations, and the shape around the mounting interface is different.

This chainring is designed for the R7100 / R8100 / R9200 generation.

Older cranksets may use different mounting contours and are not necessarily interchangeable.

For reference:

• FC-5800 / FC-6800 – Different 4-arm profile
• FC-R7000 / FC-R8000 / FC-R9100 – Different mounting contour
• FC-R7100 / FC-R8100 / FC-R9200 – Current compatible profile shown

Please verify your exact crank model before ordering.

Specifications

Size & Weight

Weights are approximate and may vary slightly due to manufacturing and measurement differences.

3mm Offset for 1x Road Builds

The 3mm offset moves the chainring position to optimize the chainline for compatible 1x configurations.

A properly aligned chainline helps the drivetrain run more smoothly and reduces unnecessary lateral chain angle.

Because cranksets and frames vary, please verify chainline and frame clearance before installation.

Narrow-Wide Chain Retention

The alternating narrow-wide tooth profile closely matches the inner and outer links of the chain.

With an extended tooth height of approximately 8.5mm, the design increases chain engagement to help keep the chain securely seated during vibration and high-intensity riding.

Ideal for clean, lightweight 1x road drivetrain conversions.

High-Rigidity 7075-T651 Construction

The chainring is CNC-machined from 7075-T651 aluminum alloy.

Its structural layout uses reinforced sections around key load areas to maintain rigidity and provide direct power transfer under pedaling loads.

Strategically machined areas help remove excess material without unnecessarily compromising structural strength.

CNC Chamfered Design

Multiple machined sections and chamfered edges reduce unnecessary material while creating a clean, dimensional appearance.

The result is a chainring designed to combine:

Low Weight · High Rigidity · Precise Fit · Clean Aesthetics

Important Installation Note

This is an aftermarket 1x chainring.

Before ordering, please confirm:

• Crank model
• 110BCD 4-arm interface
• Required chainring size
• 3mm offset compatibility
• Frame clearance
• Chainline

If you are unsure about compatibility, please contact us with your crankset model and a photo of your current chainring before ordering.

Verificação de Compatibilidade: Devido à complexidade dos modelos e lotes das peças de fabricante original (OEM), pode haver casos em que este produto seja incompatível.

Ao receber este produto, por favor, compare-o com as especificações OEM para garantir a compatibilidade antes da instalação.

Especificações de Torque: Instale este produto estritamente de acordo com os valores de torque especificados no manual das peças OEM. Problemas na Instalação: Se você encontrar qualquer discrepância com as especificações OEM ou enfrentar dificuldades na fase inicial da instalação, pare imediatamente e entre em contato com o serviço de atendimento ao cliente para assistência com devoluções ou trocas.

Não Forçar a Instalação: Não force a instalação sob nenhuma circunstância. Responsabilidade: Quaisquer danos resultantes da instalação forçada ou modificações não autorizadas deste produto (ou seus componentes) serão de exclusiva responsabilidade do comprador.

Todos os produtos são fotografados para representar com precisão as cores que você verá ao receber.

Devido a diferenças na iluminação, ângulos ou configurações da tela, podem ocorrer pequenas variações de cor.

O produto real deve ser considerado o padrão. Para produtos "coloridos" e "azuis", o processo de coloração pode resultar em distribuição desigual da cor, tornando cada produto único.